|
|
 |
|
|
|
M1151-M10A Programmable Resolver Decoder Multi-turn Programmable Resolver Decoder With Limits
Fully absolute position; no loss of position under power loss
Multi-turn (dual) resolver as position sensor
Programmable gear ratio (8, 16, 32, 64, 128, or 256:1 gear ratio)
Fail-safe broken resolver cable fault output
Ideal for shut-height indication on process
Very-easy-to-calibrateno calculations required
Fail-safe upper- and lower-safety-limit outputs
Three PLS outputs
Two Safety Limit outputs
Motion output
The M1151-M10 is a multi-turn programmable decoder. It takes the input from a single turn resolver like AVG Automation's series RL210, which is mounted on the shaft of the rotating machinery. The M1151-M10 decodes the resolver signals using highly noise immune ratiometric decoding tech-nique, scales the digital data based on the programmed Scale Factor and displays it on the front panel. |
|
|
|
The position information is also made available to the output port in BCD format for connecting to a remote display or a PLC. The position information is continuously compared to two programmable preset limits and the outputs are activated when limit conditions are satisfied. All outputs of the M1151-M10 are optically isolated and the resolver inputs are differential, insuring extremely reliable operation of the unit even in the harshest of industrial conditions.
The M1151-M10 will decode the shaft angle to 1/4096th of a revolution (12-bits) and keep track of multiple revolutions. The decoder also features tachometer and motion detector, fractional scaling, preprogrammed preset value with an external trigger, two channels of PLS outputs, full decimal point control, and PLC synchronization/handshaking for the BCD outputs.
+ Other Features
+ Click here for S p e c i f i c a t i o n s
|
|
|
[ 
